参数
常见问题
下载
对比
General
| Receiver (RX) | UC / DI / 3.5 mm TRS | ||
| Transmitter (TX) | with 2 mics | ||
| Color | Black |
Transmitter
| Size | 53 × 18.4 × 16.8 mm | ||
| Weight | 9.5 g | ||
| Sample Rate / Bit Depth | 48 kHz 16-bit | ||
| SNR (Signal to Noise Ratio) | ＞ 85 dB | ||
| SPL | 120 dB | ||
| Recording Mode | Mono | ||
| Noise Cancellation | One-click | ||
| Human Voice Enhancement | × | ||
| Low Cut Filter | × | ||
| Transmission Range | 100 m | ||
| Safety Track | × | ||
| On-board Recording | × | ||
| Diaphragm | 4 mm Condenser Microphone | ||
| Battery Life | 10 H | ||
| Clip | Plastic | ||
| Frequency Response | 20 Hz - 20 kHz | ||
| Latency | 25 ms | ||
| Human-machine Interaction | Via physical buttons | ||
| Power Supply | Built-in Li battery |
Receiver
| Monitoring | × | ||
| Playback while Connected to Mobile Devices | √ | ||
| Gain Control | × | ||
| Power Supply | 3.5 mm TRS: Built-in Li battery, UC / DI : Via the Mobile Device Connected |
||
| 3.5mm | √ | ||
| Type-C (USB-C) | √ | ||
| Lightning | √ |
Charging Case
| Size | 65.8 × 52.8 × 72 mm | ||
| Weight | 74.5 g | ||
| Battery Capacity | 600 mAh |
Q1The product isn’t working with an iPhone. What should I do?
Check if the RX receiver indicator is lit. Ensure the phone screen is on and the recording app is open.
Q2The product isn’t working with an Android phone. What should I do?
Verify the connection is secure. For some brands (e.g., VIVO, OPPO), enable the OTG function in the phone settings.
Q3Can the product be used while charging the phone?
Yes, it supports simultaneous use and charging. The RX product’s Type-C port can be connected to a Type-C charging cable to charge the phone.
Q4Can the Android receiver be connected to a charger while in use?
It is recommended to connect the charger before use to avoid disconnection issues during simultaneous use and charging.
Q5How do I activate the noise-canceling mode?
While paired and connected, press the NR button on the TX to enable noise cancellation; the indicator will show a steady green light.
Press the NR button again to disable noise cancellation; the indicator will switch to a steady blue light.
Q6The product isn't charging when placed in the charging case. What should I do?
Clean the contact points on both the product and the charging case to prevent poor connection due to oxidation. Then, charge the case
Q7The RX receiver isn’t charging when placed in the charging case. What should I do?
Only the RX35 has a built-in battery and can be charged in the case.
The RXUC and RXDi do not have batteries and require connection to a phone for power.
User Manual
BY-WM3T Series
BY-WM3T
General
- Receiver (RX)
- UC / DI / 3.5 mm TRS
- Transmitter (TX)
- with 2 mics
- Color
- Black
Transmitter
- Dimensions
- 53.0 × 18.4 × 16.8 mm
- Weight
- 9.5 g
- Sample Rate / Bit Depth
- 48 kHz / 16-bit
- SNR (Signal-to-Noise Ratio)
- ＞ 85 dB
- Max SPL
- 120 dB
- Output Mode
- Mono
- Noise Cancellation
- One-click
- Frequency Response
- 20 Hz - 20 kHz
- Latency
- 25 ms
- Human Voice Enhancement
- x
- Low Cut
- x
- Transmission Range
- 100 m
- Onboard Recording
- x
- Built-in Mic
- 6 mm Condenser Microphone
- Battery Life
- 10 Hours
- Clip
- Plastic
- Display
- x
- Human-machine Interaction
- Via physical buttons
- Power Supply
- Built-in Lithium-ion Battery
Receiver
- Monitoring
- ×
- Playback without Unplugging Receiver
- √
- Gain Control
- ×
- Power Supply
- UC / DI : Via the Mobile Device Connected
3.5 mm TRS: Built-in Lithium-ion Battery
- Charging while Recording
- √
- Supports Dual Device Output
- ×
- Adapter Design
- ×
- 3.5 mm TRS
- √
- USB-C
- √
- Lightning
- √
Charging Case
- Dimensions
- 65.8 × 52.8 × 72 mm
- Weight
- 74.5 g
- Battery Capacity
- 600 mAh
联系我们
您可以填写以下信息与我们联系。
